Hydraulic Cylinder & Jack | Products | Duplex Industrial Tools

PRODUCTS

PRODUCTS

Telescopic Cylinder1.Max Working Pressure: 700bar;
2.Telescopic Single-acting Cylinders designed for use where there is a minimal clearance for insertion of cylinders and a very high lift is necessary;
3.It can be freely used throughout 360.

RAC series Single-acting Aluminium Hydraulic Cylin1.Max Working Pressure: 700bar;
2.Light weight;
3.Single acting cylinders with heavy duty return springs and are designed to be used in all orientations;
4.50 ton and larger cylinders have been surface treated for rigidity and have carry handles;
5.The stop-ring avoids cylinder piston rod over-reaching,accommodating maximun cylinder extension.

RAR series Double-acting Aluminium Hydraulic Cylin1.Light weight;
2.These double acting cylinders enable quick retraction and are designed to be used in all orientations;
3.50 ton and larger cylinders have been surface treated for rigidity and have carry handles;
4.20T and 30T cylinders are available on request;
5.Over-pressurisation is prevented due to built in safety valves
6.The stop-ring avoids cylinder piston rod over-reaching,accommodating maximum cylinder extension;
7.Cylinder piston rod wiper reduces contamination, extending cylinder life;
8.Removable hardened saddles protect cylinder piston rod during lifting and pressing.

Mechanical Jack1.Very thin, flat design, suitable for restricted places;
2.Light weight, portable design are ideal for operating without restriction;
3.The material used promotes extended life;
4.Lifting height can be adjusted precisely by 0.01mm.

Steel Bottle Jack1.Low handle effort;
2.Automatic bypass port to prevent over-extension;
3.Wiper seal for extended life;
4.Chrome plating on both plungers;
5.Safety relief valve to prevent overload;
6.Fully serviceable;
7.Cast pump linkage;
8.Cast body;
9.Handle included on all models.

Hydraulic Machine Lift1.This bottle jack style toe jack are loaded with many of the same features as our standard bottle jacks, but the toe-lift feature and swiveling pump handle make them ideal for machinery lifting and positioning.
2.An Internal pressure relief provides added safety by limiting the jack's lifting capacity to the capacity of the toe.
3.Spring return is an added feature on the large jacks.
4.Swiveling pump handle assembly available on the 2t-25t models.
5.The swiveling jack assembly allows you to access and pump the unit from numerous positions.

Super Jack1.Mechanically operated
2.Impact resistant structure, light weight, portable, easy to repair, safe and reliable to operate
3.It is fit for railway maintenance, mining and construction as well as for other heavy load holding requirements.

BRC, BRP-Series, Pull Cylinders1. High strength alloy steel construction
2. Plunger blow-out protection to prevent rod over-extension
3. Hard chrome-plated plunger for long life
4. Replaceable links on BRP-models
5. Baked enamel ﬁnish for increased corrosion resistance
6. CR-400 coupler and dust cap included on all models
7. Plunger wiper reduces contamination,extending cylinder life
8. Single-acting, spring return.

RACH, Aluminium Hollow Plunger Cylinders1. Hollow plunger design allows for both pull and push forces
2. Composite bearings increase cylinder life and sideload resistance
3. Hard-Coat ﬁnish on all surfaces resists damage and extends cylinder life
4. Floating center tube increases seal and product life
5. Handles standard on all models
6. Steel base plate and saddle for protection against load-induced damage
7. Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
8. High strength return spring for rapid cylinder retraction.

RACL-Series,Aluminium Lock Nut Cylinders1. Aluminium Lock Nut provides mechanical load holding for extended periods
2. Hardened steel stop ring increasing cylinder life and resistance to side-loads of up to 5%
3. Hard-Coat finish on all surfaces resists damage and extends cylinder life
4. Composite bearings increase cylinder life and side load resistance
5. Handles included on all models
6. Steel base plate and saddle for protection against load-induced damage
7. Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
8. High strength return spring for rapid cylinder retraction
9. CR-400 coupler and dustcap included on all models
10. All cylinders meet ASME B-30.1 and ISO 10100 standards.

Hydraulic Toughlift Jacking System1. The strong and heavy-duty structure makes the machine have a long service life.
2. Large base pad supports oil cylinder.
3. Omni-directional wheels are convenient for transportation and placement.
4. Hydraulic control check valve provides pressure self - locking in case of emergency.
5. The cylinder and pump area are easy to be disassembled and can be easily used in other occasions or for maintenance.